Display
Display
Sort by
Show result
  • Single Digit
  • Red Color
  • Common Anode
RM0.70
  • Super Bright
  • Diameter: 10mm
RM0.80
  • Fast Changing Colors
  • Fade-cycle very quickly through several colors
  • Repeat cycle all over again
RM4.50
  • Low-power consumption character LCD
  • Display Format: 20 Characters x 4 lines.
  • Suitable for  Arduino based project.
RM25.00
  •  Super Bright
  • Red, Green, Blue
  • Common Anode
  • Diameter 5mm
RM0.80
  • LED with PCB 
  • Three primary colors (RGB)
  • PWM program can produce different color changes 
RM4.50
  • Nominal Voltage: 3.3V
  • Life Time: 10,000 hours(*)
  • Beam Angle: +/-10 degrees
RM0.30
  • Single Digit
  • Red Color
  • Common Cathode
RM0.70
  • 4:3 Ratio Display
  • 12VDC Power Supply 
  • Model : SS-12-LED-USB
  • Resolution : 1024*768
  • Dimension : 287*232*42mm
  • 12 inch Display
  • Brand : SAMSER
  • Brightness : 400cd/m2
  • Max Side Viewing Angle : 160 degree/ 135 degree
  • OSD Menu : Yes
  • Language : English, Chinese and etc.
  • Display Signal : AV, BNC, HDMI, VGA 
  • Frequency Rate : 50Hz, 60Hz, 70Hz, 75Hz
  • Come with Mini Speaker 
  • Rated Power : Less than 10W
  • Weight 2KG
RM190.00

Display: 192 X 64 Dots
Module Size: 100.0 X 60.0 X 13.0
Viewing Area: 84.0 X 31.0
Dot Size: 0.36 X 0.36
Controller IC: KS0108 or equal

RM62.00

4-digit digital tube display module LED brightness adjustable with clock point

The module is a 12-pin 4-digit common anode digital tube (0.36 inch) display module with clock dots. The driver chip is TM1637. Only 2 signal lines are needed to enable the single-chip microcomputer to control the 4-digit 8-segment digital tube.

The module features are as follows:

  •      The display device is a 4-digit common anode red-digit digital tube
  •      Digital tube 8 levels gray scale adjustable
  •      The control interface level can be 5V or 3.3V
RM4.20

LCD type : LCD1602 (16*2)
IIC / I2C module soldered on LCD.
4 Pinout with VCC,GND,SDA,SDL
IIC Address : 0x27
Size : 82mm * 36mm*  18mm
Blue Background , White colour word display

RM9.90
  • Compatible 16x2 or 20x4 Character Display Module
  • Serial I2C control of LCD display using PCF8574
  • Backlight can be enabled or disabled via a jumper on the board
  • Contrast control via a potentiometer
RM5.40
  • E10 Light Bulb 
  • Rated Voltage : 5V
  • Rated Current : 0.45A
  • Length of Wires : approximately 8.5cm .
  • Wires are tinned with solders
  • Compatible with STEMSEL
RM12.00
  • Power: 5V
  • Size: 82x15x12mm(LxWxH)
  • Shell Color: Blue & black
  • Net Weight: 13g
RM9.60