Specification
- Diameter: 1.75mm.
- Weight: 1kg.
- Print temperature: 195-230°C.
- Melt temperature: 190°C 2.16kg
- Print bed temperature: 0-60 ˚C
Specification:
✅ Input voltage: start from 220VAC
✅ Voltage regulation: AC 10V-220VAC
✅ Maximum power: 4000 W
✅ Efficiency: 90%
✅ Size: 85mm x 55mm x 38mm
Warning:
* High voltage, take extra precaution
* Do not try to open or modify the regulator
* Add ground/earth wire on the metal casing for safety.
Specifications | |
---|---|
Pulses Per Revolution: | 400PPR |
Output: | A/B 90 degree phase shifted square wave outputs, ( NPN open collector ) |
Operating Voltage: | +5 to 24vbdc ( recommend +15vdc maximum ) |
Maximum Rotational Speed: | 5000 RPM |
Shaft Size: | 6mm diameter x 13mm long |
Overall Size: | 38mm diameter x 35.5mm deep |
Cable Length: | 1.5 metres long |
- In pack of 4 pieces
- Size: AA
- Super Heavy Duty
- Carbon Zinc
- Voltage: 1.5V
- Diameter: 14.5mm
- Height: 50.5mm
- Model: GP 15PL R6P
- 0% Mercury
Specification:
- Material: ABS
- Input Voltage: AC 100-240V 50/60Hz
- Output Voltage: DC 5V 2.5A(2500mA)
- Fixed Switching Voltage with low noise, more reliability and stability.
- Portable to Carry
- UK Type Power Supply Adapter coming with Micro USB Cable (power cable)
- Coil Resistance: 500Ω (+/- 10%)
- Nominal Coil Voltage: 5V DC
- Maximum Continuous Voltage 10 VDC
- Rated Current: 10mA
- Operating Temperature: -40 to 85°C
- Storage Temperature: -40 to 125°C
- Resonant Frequency 3.5KHz
- Maximum Switching Voltage: 200 VDC
- Maximum Swtiching Current: 0.5 A
- Maximum Carry Current: 1A
-
Features:
- These Soldering Iron Sponges are ideal to be used as replacements for old sponges.
- Use to keep your soldering tip clean.
- Moisten slightly before use.
- When it wet water will be inflate, welding time soldering iron will have the solder and the residue , the sponge makes the cleaning action
- Strong absorbability
- Help on the tin and antioxidant
- Endurable
-
Specification:
- Material: Sponge Color : Yellow/Blue
- Size: ~ 6cm*6cm*1mm
- Use for: (936) Remove solder residue , maintain PCB components clean.
- Notice: Please soak the sponge in water before use!
Note: Shake well before using and you need to maintain a continuous and uniform line when you draw, if still not conducting, you'd better to check and find the break by using the multimeter.
Features:
Good conductivity, Simplify operation, Easy to use
Conductive Ink
Ink colour: Gold
Package Material: ABS
Capacity: 6 ml
Weight: 20g
Description:
Shuttlecock is a traditional sport toy. It is a good tool for exercising leg muscle strength and body flexibility. Suitable for all ages.
Features
-You can kick the shuttlecock alone anytime, anywhere.
-Relieve stress and relax the mind.
-More Ways To Play:exercise, ouutdoor game or competition
-Keep the Foot Feather afloat using feet, knees, legs, or chest - no hands!
-Exercise leg muscle strength and body flexibility.
-Keep it always in the air with legs kicking it as long as possible.
-Kicking Shuttlecock Foot Exercise Outdoor Game.
-Plenty of room to progress,show off fancy footwork & execute killer tricks.
Specification
Size:21*12*11cm
Material:Rubber(bottom holder), Goose Feather
Color: Colorful
Application:exercise, outdoor game and competition
application:
- 3D printer
- CNC engraving machine
- Hotline machine
- Laser engraving machine
- Camera slider
- Plasma cutting machine
- robot
- furniture
- Woodworking DIY
- And more
Material: Zinc Alloy
- Easy to install, silent.
- The 2020 type is equipped M5*10 countersunk CSK head screw / flat head cap screw is used on the 2020 type European standard 2020 profile.
- The 3030 type is equipped with M6*12 countersunk CSK head screws / flat head cap screw on the European standard 3030 profile.
- The4040 type is equipped with M6*16 countersunk CSK head screws/ flat head cap screws on the European standard 4040 profile.
- Supply Voltage: Up to 36 V(depends on driver)
- Compact Design
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins A4 and A3)
- 2 x End stops for each axis (6 in total) + one Probe
- PWM Spindle and direction pin
- Coolant enable output
Microcontroller |
W5100 |
Operating Voltage |
5V |
Input Voltage (recommended) |
7-12V |
Input Voltage (limits) |
6-20V |
Digital I/O Pins |
14 (of which 4 provide PWM output) |
Analog Input Pins |
6 |
DC Current per I/O Pin |
40 mA |
DC Current for 3.3V Pin |
50 mA |
Flash Memory |
32 KB (ATmega328) of which 0.5 KB used by bootloader |
SRAM |
2 KB (ATmega328) |
EEPROM |
1 KB (ATmega328) |
Clock Speed |
16 MHz |