Suitable for Nema 17, Nema 23 and Nema34 Stepper Motor,2-phase hybrid stepper motors (Outer diameter: 42, 57,86mm).
DM542
Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise.
This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 42,57,86 type 2-phase 4-phase (4-wire, 6-wire, 8-wire)
DM556
About this item
Suitable for Nema 23 ,Nema 24 and Nema34 Stepper Motor,2-phase hybrid stepper motors (Outer diameter: 57, 60,86mm).
This high subdivision driver is suitable for high subdivision motor. Suitable for stepper motor: 57,60,86 type 2-phase (4-wire, 6-wire, 8-wire)
Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
Package: 1piece DM556 driver
Features
- Donut board (individual copper per hole)
- Spacing (Hole to hole distance): 100mil or 2.54mm
- Material: Paper Pheonolic
- Number of holes: 96 columns x 35 rows, 3360 Holes.
- All holes are plated through, for through-hole component
- Dimension: 10cm x 24cm
Diameter:
1.4 , 1.0 , 3.0 , 2.5 , 1.5 , 3.2 , 1.7 , 1.8 , 2.7 , 2.3 , 2.8 , 2.6 , 2.2 , 1.3 , 1.9 , 2.4 , 1.2 , 2.0 , 1.1 , 3.1
- Brand name : DT
- Model number : 830D+
- Material : ABS
- LCD Display : 2" or 50.8mm
- Features : Portable
- Max. Display : 9999
- Max. Input DCV: 600 V
- Max. Input ACV: 600V
- Max. Input DCA: 10 A
- Power Supply : DC 9V Battery
- Dimension: 9.15 x 3.80 x 11.5 cm
Measurement Accuracy:
- DC Voltage : 200mV / 2V / 20V / 200V / 600V +/- (0.5%+3)
- AC Voltage : 200V / 600V +/-(0.8%+5)
- DC Current : 200uA / 2mA / 20mA / 200mA / 10A +/-(1.0%+3)
- Resistance : 200 / 2K / 20K / 200K / 2M +/-(0.8%+3) ohm
- Model: E18-D80NK
- Light Source: Infrared
- Output Current DC/SCR Relay Control Output: 100mA/5V
- Sensing Distance: 30mm to 80mm (adjustable)
- Input Voltage: 5VDC
- Current Consumption: <25mA DC
- Tyoe: NPN output
- Response Time: < 2ms
- Operating Temperature: -25°C to +55°C
- Dimension: 43mm (Length) x 17mm (Diameter)
- Cable Length: 450mm
1 unit of USB to ESP8266 Serial Port Wireless Module Adapter Board
Specification :
- Chip: Dual Mode with 2.4 GHz Wi-Fi + Bluetooth
- Support 3 Modes: AP STA, AP+STA coexistence mode
- Work Perfectly with Arduino IDE.
- Power Consumption: Low
- Safe, reliable and scalable to variety of applications
- Support LWIP protocol, freertos
- Integrated Wi-Fi MAC/ BB/RF/PA/LNA/Bluetooth-compatible
- Support multiple sleep es, deep sleep electric current is less than 5uA
- UART rate up to 5Mbps
- ESP-C3-32S Specification V1.0
- Support STA/AP/STA+AP e and mix e
- Support Smart Config (APP)/AirKiss (WeChat) of Android and IOS One-click network configuration
- Support UART port local upgrade and remote firmware upgrade (FOTA)
- General AT commands can be better understand Support secondary development, integrated
- Linux development environment ESP-C3-32S ule acquiesce in using the built-in 4MByte
- Flash, meanwhile support external
- Flash version type:ESP32-C3-32S
- Operating Temperature: 2.4GHz WiFi Wireless ule Dissipation
- Power: 4M
- Colour: black
- Material: plastic
- Size: about 50x26mm
1 unit of ESP8266 Serial WiFi Shield Extend Board Module for Arduino UNO R3
Specification:
- Model: AWM 20624 80C 60V VW-1
- Pins: 4-40 Pins
- Pitch: 0.5mm
- Type: Same
- Length: 10/20/30Cm
- Temperature: -40℃ to 85℃;
- Externl Material: Plastic
- Color: Blue, Silver Gray
- Rated Voltage: 60V;
- Rated Current: 1A;
- Contact Resistance: ≤30mΩ;
- Insulation Resistance: ≥100MΩ;
- Withstand Voltage: AC500V@1Min;
- The each end cable is reinforced with a stiffener to make insertion easier or to provide strain relief.
Description:
- Number of Pins:6 - 60Pin
- Rated voltage: 50V
- Rated current: 0.5A
- Contact resistance: less than 50mΩ
- Pitch: 2.54mm
- Gender of Connector: Female
- Number of Pins: 2 x 5Pin
- Type of Row: Double-Row
- Body Orientation: Straight
- Model: 1604S 6F22 9V
- 9V battery
- Super Heavy Duty
- Dimension: 48.5 x 26.5 x 17.5 mm
- Non-Rechargeable battery
- Carbon 2 in 1
- Carbon Zinc Battery
- High capacity and long service life
- Economical and superior endurace
- Battery operated devices that need limited power to funtion
- Environmentally Friendly
- Good performance for general battery.
- Non-mercury added
Item Type : Dowel
Material : Iron Nickel Plated
Tip Type : M3 Screw Thread Plated
Diy Supplies : Electrical
Certification: None
Colour: Silver
Overall Size : (L*Max.D)
Usage : Suitable For Testing Board Positioning .
TYPE A
- The TCS3200 is TCS230 upgraded version better
- Power supply 3-5v
- Resistance to light interference
- White LED can be controlled on, off.
- Can detect non-luminous object color
- Best detection distance 1cm
TYPE B - Color Sensor Specifications
- Supply Voltage:2.7V- 5.5V.
- Communicates Directly With a -Microcontroller/Arduino.
- High-Resolution Conversion of Light Intensity to Frequency.
- Power Down Feature.
- Programmable Color and Full-Scale Output Frequency.