Techmakers
Sort by
Show result
  • Smooth surface paired with high mechanical strength and toughness
  • Anti-static, ESD stainless steel.
  • High purity - clean room compatible
  • High abrasion resistance
  • Excellent chemical resistance to most acids and solvents

Typical applications:

  • Handling of scratch sensitive samples
  • Cleaning and etching processes
  • Handling of static and/or static-sensitive components
  • Handling of soft specimens
  • Handling of magnetic specimens
RM2.50
  • Rated Voltage : 3.3V to 5V
  • Rated Current : less than 30mA
  • Length of Wires : approximately 8.5cm
  • Resonant Frequency : 2300Hz
  • Color : Black
  • Wires are tinned with solders
  • Compatible with STEMSEL
RM12.00
  • 15 root signal lines 
  • Terminal spacing of 5.0 MM, the screw hole diameter of 2.5 MM, need to use the width of 2.5 MM for disassembling a screwdrive
  • VGA 3+9 widely use for 3+9/3+7/3+6/3+5/3+4/3+2 VGA cable.
  • Foldable housing that can be reused without tools for easy assembly and disassembly
  • PCB double-layer circuit design, lead-free instrument welding, environmentally friendly copper terminal blocks.
RM18.00
  • Model: DS-213
  • Item: Push Button Switch
  • Working Power: 125V 2A / AC
  • Max Power: 250V 3A
  • Contact Resistance: 0.01(Ω)
  • Insulation Resistance: 20(MΩ)
  • Thread Diameter: 10mm
  • Working Life: 100000 Times
RM1.50
  • Push button Colour : Green 
  • Cutout Diameter
  • Push button Actuation : Momentary
  • Contact Configuration : Normally Open NO 
  • Push Button Style : Round 
  • Illumation : None
  • IP Rating: IP20, IP65
  • Maximum AC Voltage : 240V
  • Maximum DC Voltage : 250V
  • Mounting Type :  Panel Mount
  • Terminal Type : Screw
  • Maximum Operating Temperature:  70 degree Celsius
  • Maximum current : 220mA dc, 600mA ac
RM4.00
  • Type:Hdmi Male Plug Terminals Connector
  • Suitable Cable Outer Diameter:less than 11mm
  • Terminals Pitch:54mm(need to use with the width less 2MM flathead screwdriver)
  • Suitable Wire Gauge:20-26AWG
RM12.00
  • Stainless Steel Waterproof Thermistor
  • Rated Voltage : 5V
  • Voltage Divider Configuration with 27kohm
  • Length of Wires : approximately 8.5cm .
  • Wires are tinned with solders
  • Compatible with STEMSEL
RM12.00
  • Rated Voltage : 5V-12V
  • Rated Current : 0.10A (Max)
  • Size of LEDs : 3mm
  • Length of Wires : approximately 8.5cm .
  • Wires are tinned with solders
  • Compatible with STEMSEL
RM18.00
  • E10 Light Bulb 
  • Rated Voltage : 5V
  • Rated Current : 0.45A
  • Length of Wires : approximately 8.5cm .
  • Wires are tinned with solders
  • Compatible with STEMSEL
RM12.00
  • Voltage Divider configuration with 22kohm resistor 
  • Rated Voltage : 5V
  • Length of Wires : approximately 8.5cm .
  • Wires are tinned with solders
  • Compatible with STEMSEL
RM12.00
  • Operating Voltage: 3-6VDC
  • Rated Current: 0.35-0.4A
  • Shaft diameter: 2mm
  • Shaft Length: ~8mm
  • Size: 20mm x 15mm x 25mm
  • RPM at 3V : 17000-18000rpm
  • Built in current limiting resistor 1ohm 2W
RM15.00
  • Voltage: AC 250V 3A 
  •  Terminals: 2 Pins
  •  Switch height: 32.5mm
  •  Button diameter: 12mm
RM1.00
  • Voltage: AC 250V 3A 
  •  Terminals: 2 Pins
  •  Switch height: 32.5mm
  •  Button diameter: 12mm
RM1.00

Function:
To properly seat your bowden cable, it is necessary to have a clean, square, end. Without it, there is a risk of oozing, or worse, clogging, in the hot end. This super sharp pipe cutter is the perfect tool to get a clean, square pipe cutout, every time.A stainless steel blade and spring are available. The housing is made of durable, durable plastic.Fits 6mm pipe diameter. It can also be used to cut fibers.


We have also tested these for durability, and from a height of over 1 meter on a concrete floor without damage.
Special, adapted to high-quality Teflon pipes
1 M PTFE tube Teflon tube for TL feeder
1.75mm filament ID number 1.9mm OD 4mm
Disclaimer: Our product is not a Capricornus tube brand, please do not understand.

RM4.80
  • Push button c/w with 10kohm pullup resistor
  • Protection Resistor for reverse connection 390ohm
  • Rated Voltage : 5V -24VDC
  • Length of Wires : approximately 8.5cm .
  • Wires are tinned with solders
  • Compatible with STEMSEL
RM20.00