Search result
Sort by
Show result

Material: ABS
Color: White/Transparent/Black
 

  • This cable/wire kit is just what you need to keep cords/wires out of the way and free from tangles
  • The clips are suitable for TV lines, telephone lines, and so on
  • Easy installation, peel off the paper and stick to the wall, get the cable through the hook, it is fixed

 

RM10.00

Features
 

  • Operating voltage : 5V
  • Fan blade diameter : 75mm
  • Support PWM speed control
  • The module has mounting holes for easy mounting
  • Compatible steering rudder control
RM11.50

Usage :

  • Put the tip into the metal wire of the cleaner in order to clear away the residual solder.
  • Don't take out the metal wire to sweep the tip, since it is springy ,will possibly splash the melted residual solder .be carefully while using it
  • .Please wear your gloves when exchange the metal wire. Be careful not to break the solder on .Please put the cleaner uprightly when open it.

Feature of Product :

  • The iron clean mouth is the new generation of iron clean tool, smokeless, is tasteless, non-toxic, does not have the pollution,
  • One kind of ball color environmental protection tool auxiliary. Saves the energy is lower than the common iron clean sponge cost,
  • Dose not use the watering, facilitates durably can effectively maintain the iron the temperature in the clean tinsel include helps welds with the clean ingredient.
RM14.00
  • 9-pin female to female computer cable
  • Lenght: 1.5m
  • Number of Populated Ways: 9
  • Sheath Colour: White
  • Outer Sheath Material: PVC
RM10.00

Descripton: Brand new, High Quality. Data transfer rate up to 1 Mbps This USB to RS 232 Converter Cable is designed for ideal connections to cellular phone Provide a simple and easy way to connect universal serial bus and serial port interface Support remote wake-up and power management Users have the capability to utilize the peripheral with plug & play swap function with this USB Converting Cord. System requirements: Windows 98/2000/Me/XP/Vista/Mac Connector input: USB1.1 port Connector output: 9 pin RS 232 interface Cable length: approx.

RM18.50
  • 0.3μm Alloy iron coating thickness
  • 0.2μm Chrome and nickel coating thickness
  • Tip length: 17mm
RM18.90

Specification:
-New rasp first use side, when the blunt side, then use the other side.
-When cutting and filing, and often with a wire brush to remove cuttings file teeth on.
-High quality alloy material with a special treatment, so rasp surface hardness higher, longer service life.
-Special tooth design, the rasp sharper, improve cutting ability.
-Made of high carbon steel, durable

RM12.50

Specifications:

  • 6.5*4.5MM
  • 5.6*4.1MM
  • 5.6*4.1MM
  • 5.6*4.1MM
  • 4.0*1.7MM
  • 4.8*1.7MM
  • 5.5*1.7MM
  • 5.5*2.5MM
  • 6.3*3.0MM
  • 6.5*4.3MM
RM13.50
  • Grounding: Standard Grounding
  • Rated Voltage: 250V
  • Rated Current:10A
  • Application: Residential / General-Purpose
  • Product name: Power Socket
  • Rated voltage: 250VAC
  • Function: Power Adaptor
  • Housing Material: NYLON
  • Metal Material: Copper
  • Color: Black
RM14.20

RBL-10A, maximum Voc: 24 V (12 V), 48 V (24 V); maximum power: 120 W (12 V), 240 W (24 V)

RBL-30A, maximum Voc: 24 V (12 V), 48 V (24 V); maximum power: 360 W (12 V), 720 W (24 V)

RBL-50A, maximum Voc: 24 V (12 V), 48 V (24 V); maximum power: 650 W (12 V), 1300 W (24 V)

Features:
1. Built-in industrial microcontroller.
2.Large LCD display, all parameters are adjustable.
3. Complete 4-phase PWM charge management.
4. Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection.
5.Double mosfet reverse current protection, low heat.

Parameter:
Model: RBL-10A, RBL-30A, RBL-50A
Battery voltage: 12V/24V automatic
Charging current: 10A, 30A, 50A
Solar input max.: 48 V (for 24 V battery) 24 V (for 12 V battery)
13.7 V trick flow charging (default, adjustable)
Stop Drain: 10.7 V (default, adjustable)
Discharge reconnect: 12.6 V (default, adjustable)
Reconnect: 13 V
Open-circuit voltage solar panel: 8 V (time-delay lamp)
Closed voltage solar panel: 8 V (delayed light)
USB output: 5 V / 3A
Automatic consumption: <10mA
Operating temperature: -35 ° C ~ + 60 ° C
* When using a 24 V system, all red voltages X2.
connection

1. Connect the battery to the positive and negative terminals of the charge controller.
2. Connect photovoltaic modules for regulator positive and negative.
3. Connect the user to the positive and negative terminals of the charging controller.
The reverse order applies when uninstalling!
Incorrect sequence will damage the controller!
Packing: 1pcs controller

RM18.90

Features:
High alloy steel S2, whole induction hardening, wear.
Hardness: HRC 58-60 Degree
Professional, fast, convenient, powerful, tough and accurate.
Usage: Screws can be screwed with electric screwdriver or manual tool. Head anti-skid texture can better occlude nuts and avoid skidding.

RM19.80

125KHz USB Proximity Sensor Smart RFID ID Card Reader.

Key Features:
USB interface, no driver required
Read the card inside the ID number and send it to the computer via the USB interface.
The output format can be selected by management cards

Specification:
Frequency: 125KHz
Interface: USB
Plug and Play
Reliable working condition
Powered directly from USB, no need external power supply
Read first 10 digits of the RFID/Proximity card.
Diagnostic Power LED
Built-in operating buzzer
Easy usage
Compact design

Handheld IC/ID Writer Copier Reader Duplicator Access Control 

Specifications:
Size: 11* 4.5 *2 cm/4.33*1.77*0.79inch
Weight: 60g
Operating distance: 3cm (max)
Voltage: DC, 3V Two AAA Batteries (Not included)
Current: 200mA (operating), 50mA (standby), 100mA (conventional)
Working temperature: 0-50°C
Operating frequency: 13.56 MHz/125K/250K/375K/500K

RM18.50

Feature and Benefits
- Type: NC/normally closed
- Thread: G1/2
- Rated current: 12v-300mA
- Insulation grade: E insulation grade
- Applicable fluid temperature: 0-55℃
- Applicable water pressure:0.02-0.8Mpa
- Size: 6.5x3.3x5.5cm/2.6x1.3x2.2inch
- Material: Plastic + copper
- 10 PCS
- DC12V

RM18.50

VIN+ = Voltage Input (+) Postive/Anode
VIN- = Voltage Input ( - ) Ground / Cathode
VOUT+ = Voltage Output (+) Positive /Anode
VOUT - = Voltage Output (-) Ground / Cathode

RM12.50

Features:

  • Durable, safe and easy to use.
  • Electrical test leads suitable for use with multimeters, power supplies and other electronic equipment.
  • This cables are frequently used in school physics laboratories to quickly and cheaply assemble circuits.
  • They are useful for connecting components to wires.
  • Easy installation and safety for use with the insulation plastic covered.

 
 Specification:
 

  • Material: Copper
  • Color: Black, Red, Green, Yellow
  • Current: 15A (Max.)
  • Wire Diameter: 4mm
  • Wire Gauge: 18AWG
  • Length: 1m, 1.5m, 2m, 3m
RM15.00