Bestsellers
Sort by
Show result
  • Accurate sensor to measure AC/DC current 
  • Analog voltage proportional to current measured 
  • Extremely stable output offset voltage
  • Nearly zero magnetic hysteresis
  • Factory-trimmed for accuracy
RM6.50
  • Length : 1m
  • 4mm Banana plug
  • 35mm small size Alligator
  • Current range : 0 - 5A
  • Comes in a pair
  • Color: RED and BLACK
RM3.20
  • Single row
  • 40 pin 
  • Pin Pitch: 2.54mm
  • Dimension: 10.2cm x 0.24cm x 0.9cm
  • Colour: White, Blue, Green, Red, Yellow
RM0.70

SPECIFICATION
•    Material: Stainless Steel A2/ 304
•    Type: Flat washer
•    Diameter size:  M2.5 / M3 / M4 / M5 / M6 / M8 / M10


PACKING INCLUDES
•    1pc x Stainless Steel Flat Washer

RM0.20
  • Board ID : ESP-01
  • Operating Voltage : 3.3V ;Require an external logic level shifter at TX/RX
  • 8 pins which includes TX & RX pins, Reset Pin, Vcc & GND pins
  • 2 External GPIO pins which are GPIO0 & GPIO2
  • Etched-on PCB Antenna, No Antenna Socket, Unshielded
  • Supports IEEE 802.11 b/g/n Wi-Fi, Client & Server Modes
RM7.90
  • Single Row 40 Pin
  • Male Header
  • Individual Pin Length = 11mm
RM1.30
  • To detect the intensity of light.
  • Resistance will become low according to the intensity of light.
  • Input Voltage: DC 3.3V to 5V
  • Sensitivity adjustable
RM3.20
  • Microcontroller: ATmega2560
  • Digital I/O Pins: 54 digital input/output pins (including 15 PWM Pins)
  • Analog I/O Pins: 16 analog inputs
  • Input Voltage (recommended): 7-12V
  • Maximum Input Voltage: 6-20V
  • Clock Speed: 16 MHz 
  • DC Current per I/O pins: 40mA
  • DC Current (3.3V) : 50mA
  • Flash Memory: 256 KB (8 KB for Bootloader)
  • SRAM : 8 KB
  • EEPROM: 4 KB
  • Replacement : ATMEGA16U2 to CH340G


Type C
Specification:

  • Microcontroller Genuine ATmega2560
  • CH340G replaces the Atmega16U2(USB Chip), faster
  • and cheaper.
  • Operating Voltage 5V
  • Input Voltage(recommended) 7-12V
  • Digital I/O Pins 54(of which 14 provide PWM output)
  • Analog Input Pins 16
  • DC Current per I/O Pin 40Ma
  • Flash Memory 256KB of which 4 KB used by the
  • bootloader
  • DC Current for 3.3 V Pin 50 Ma
  • SRAM 8 KB
  • EEPROM 4KB
  • Clock Speed 16MHz
  • Size: 101.6mm(L) * 53.34mm(W)
RM68.00
  • Description :

    If you need to transfer water from a place to another place,you can use this pump. It's 12V DC Diaphragm pump. Capable of pumping water at 1.6 liter/ min rate.

     

    Spectification :

  • Operating voltage : R385 ( 6-12V ), R365 ( 4-6V )
  • Rated Current : 0.5A
  • Flow Rate : 1.6L ± 0.1L / min
  • Power : 6W
  • Water pressure at inlet : 0.3Mpa or 43.51 psi
  • Max continuous operating hour : 12 hours
  • Operating water temperature : 5ºC to 45ºC
  • Operating Temperature : 5ºC to 40 ºC
  • Recommended working hour per day : 8 hours
  • Inlet and output host diameter : 7mm
RM10.50
  • Model: E18-D80NK
  • Light Source: Infrared
  • Output Current DC/SCR Relay Control Output: 100mA/5V
  • Sensing Distance: 30mm to 80mm (adjustable)
  • Input Voltage: 5VDC
  • Current Consumption: <25mA DC
  • Tyoe: NPN output
  • Response Time: < 2ms
  • Operating Temperature: -25°C to +55°C
  • Dimension: 43mm (Length) x 17mm (Diameter)
  • Cable Length: 450mm
RM1.50
  • Made of plastic and metal material
  • PCB mounting socket
  • 3 pins, right angle

 

RM0.80
  • Rated Value : 400V, 10A
  • Positions : 3/4/6/10/12Design : Fork Type
  • Pin Outer Width: 6.2mm
  • Pin Inner Width: 3.83mm
  • Center to Center Pitch: 9.5mm
  • Material : PVC, Metal
  • Color : Red/Black
RM2.00

JST connectors are used in many types of products, and commonly used by electronics hobbyists and consumer products for rechargeable battery packs, battery balancersbattery eliminator circuits, and radio controlled servos.[4]

RM0.70