Latest Products
Sort by
Show result

Specification: 

  • Input Voltage: DC 5-30V
  • Input Current: 8A ( Maximum )
  • Static Operating Current: 4mA
  • Output Voltage: DC 1.25-30V
  • Output Current: 10A(max)
  • Output Constant Current Range: 0.2-10A
  • Working Temperature: -40~85 degrees
  • Working Frequency: 150KHz
RM25.00
  • Model Number: 17HS19-2004S1
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Step Accuracy: 5%
  • Holding Torque: 59Ncm(84oz.in)
  • Rated Current/phase: 2.0A
  • Voltage: 2.8V
  • Phase Resistance: 1.4ohms
  • Inductance: 3.0mH ± 20%(1KHz)
  • Weight: 400g
RM50.00
  • Rated Voltage: 11.1V 
  • Capacity: 3000mAh (3.0 Ampere Hour)
  • Maximum discharge rate: 35C
  • Able to use for most of the 12V controllers, motors or any other appliances
  • Must be charged with designated LiPo Battery Charger
  • Recommended Charging Rate:  0.5 - 1.5A
  • If it is not used for a long time, please maintain the voltage at 11.4V, the recommended storage voltage.
  • Weight: ~ 200gram
  • Dimension: 100mm x 32mm x 27mm (Not including cables)
RM90.00
  • Operating Voltage: 4.8V to 6.0V DC
  • Speed: 0.1 s/60° @ 4.8V without load
  • Torque:  1.8 kg.cm (~0.1765 N.m) @ 4.8V
  • Rotation Angle: 0°- 180°
  • Gears Material: Metal
  • Compatible with Arduino Servo Motor Library
  • Wiring:
    • RED: 5V
    • BROWN: GND
    • ORANGE: SIGNAL
  • Weight: 16g
  • Dimension: 22.3 x 11.8 x 28.3 mm
RM14.00
  • Compatible with standard (dual 5/3.3V) and 3.3V-only boards.
    • Arduino Uno R3 
    • Arduino Mega 2560.
    • Arduino Diecimila/Duemilanove 
  • Support:
    • HID devices, such as keyboards, mice, joysticks, etc.
    • USB to serial converters - FTDI, PL-2303, ACM, as well as certain cell phones and GPS receivers
    • ADK-capable Android phones and tablets
    • Digital cameras - Canon EOS, Powershot, Nikon DSLRs and P&S, as well as generic PTP
    • Support for more devices is currently in development.
RM45.00
  • Arduino programming language
  • Basic circuit theory.
  • Basic knowledge before programming
  • Simple projects for easy understanding
RM80.00
  • Date: 20/12 & 21/12 (Friday & Saturday)
  • Time: 9.00am - 12.00pm
  • Fees: RM150
  • Venue: Techmakers Academy
  • Address: 31-2nd Jalan Dato Ismail, 11900 Bayan Lepas Penang
  • Things to Bring: A laptop & materials purchased at the last stemsel Bootcamp.
RM150.00
  • Date: 04 December 2019 (Wednesday)
  • Time: 9.00am - 1.00pm
  • Fees: RM200 (inclusive of a robotic car, STEMSEL inventor kitset, refreshment and a certificate)
  • Venue: Techmakers Academy
  • Address: 31-2nd Jalan Dato Ismail, 11900 Bayan Lepas Penang
  • Things to Bring: A laptop
RM200.00
  • Date: 12/12 & 13/12
  • Time: 9.00 am to 1.00 pm
  • Venue: Techmakers Academy
  • Address: 31-2nd Jalan Dato Ismail, 11900 Bayan Lepas Penang
  • Things to Bring: A laptop
RM200.00

Specification

  • Model: CTD-050300A
  •  Output: DC 5V 3.0A
  • DC plug: USB type C
  • Cable length: 100cm
  • Input: 100V~240V, 50Hz~60Hz
  • Output: DC 5V/ 3000mA (3A)
RM30.00
  • Broadcom BCM2837 64bit ARM Cortex-A53 Quad Core Processor SoC running @ 1.2GHz
  • 1 GB RAM
  • 4 x USB2.0 Ports with up to 1.2A output
  • Expanded 40-pin GPIO Header
  • Video/Audio Out via 4-pole 3.5mm connector, HDMI, CSI camera, or Raw LCD (DSI)
  • Storage: microSD
  • 10/100 Ethernet (RJ45)
  • BCM43143 WiFi on board
  • Bluetooth Low Energy (BLE) on board
  • Low-Level Peripherals:
    • 27 x GPIO
    • UART
    • I2C bus
    • SPI bus with two chip selects
    • +3.3V
    • +5V
    • Ground
  • Power Requirements: 5V @ 2.4 A via microUSB power source
  • Supports Raspbian, Windows 10 IoT Core, OpenELEC, OSMC, Pidora, Arch Linux, RISC OS and More!
  • Dimensions: 85mm x 56mm x 17mm
RM165.00

Specification:

  • Operating Voltage Range: DC4.5-20V
  • Static Current: <60uA
  • Output Level:
    • High = 3.3V 
    • Low = 0V
  • Trigger: Repeatable Trigger (Default)
  • Delay Time: Default 8 seconds +-30%
  • PCB Dimensions: 10 x 23mm
  • Induction Angle: <100 Degree Cone Angle
  • Induction Distance: within 3 meters
  • Working Temperature: -20 - +80 degrees
  • Sensor Lens Diameter: 10mm
  • Dimensions: 1.57 x 0.51 x 0.39" / 4 x 1.3 x 1cm (L x W x H)
  • Color: White
  • Weight: 5g
  • Material: Aluminum Alloy & Plastic
  • Base Type: E06
RM7.50

Specification

  • Diameter: 1.75mm.
  • Weight: 1kg.
  • Print temperature: 195-230°C.
  • Melt temperature: 190°C 2.16kg
  • Print bed temperature: 0-60 ˚C
RM49.90
  • Motor length: 32MM
  • Motor diameter: 28MM
  • Pump length: 36MM
  • Total length: 69MM
  • Pump diameter: 40MM*35MM
RM8.60
  • Broadcom BCM2711, 64-bit ARM Cortex-A73 (ARMv8), Quad-core, 28nm Processor SoC running @ 1.5GHz c/w metal body for better heat dissipation.
  • LPDDR4 4GB SDRAM
  • USB 3.0 Port + 2 x USB 2.0 Port
  • Expanded 40-pin GPIO Header
  • 4-pole 3.5mm Connector
  • 2 x Micro HDMI Port, support 4Kp60 videoDual Display
  • Raw LCD (DSI)
  • CSI Port for Image / Camera input
  • Storage: Micro SD Card
  • True Gigabyte Ethernet Port up to 900Mbps or MORE !!!
  • POE (Power-Over-Ethernet) support, requires seperate POE Hat
  • 2.4GHz & 5GHz IEEE 802.11.b/g/n/ac Wireless LAN.
  • Bluetooth 5.0 & BLE (Bluetooth Low Energy)
  • Power Requirement: 5V 3A via USB Type C Cable
  • Supports Raspbian (Check 3rd Party Operating System here.
  • Dimension: 85mm x 56mm x17mm
RM299.00