-
Any motor with 15mm round output shaft
-
Stell with zinked plated offers strong, solid and rigid coupling/hub
-
Come with three mounting holes tyre with standard M5 bolt, philip cap (included)
-
Shaft and Coupling is locked using two M4 bolt, philip cap (included)
FEATURES
• Glass passivated chip junction • Available in uni-directional and bi-directional • 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified
Features ·
Programmable Precise Output Voltage from 2.5V to 18V · High Stability under Capacitive Load · Low Temperature Deviation: 4.5mV Typical · Low Equivalent Full-range Temperature Coefficient with 20PPM/oC Typical · Sink Current Capacity from 1mA to 100mA · Low Output Noise · Wide Operating Range of -40 to 125oC
- Charging current: 1A Adjustable (Through 1.2k R3 RPROG Resistor)
- Charge Accuracy: 1.5%
- Input voltage: 4.5V-5.5V
- Full charge voltage: 4.2V
- Over discharge / Deep Drain protection voltage: 2.5V
- Over-current protection: 3A
- Working temperature: -10 Degree to +85 Degree
- SIZE : 2.5MM(squared)
- VOLTAGE : 450/750V
- LENGTH : 100M +/-
- 100% PURE COOPER
- MADE IN MALYSIA
- HIGH QUALITY PVC INSULATED
- Suruhanjaya Tenaga and SIRIM Certified To MS2112-3
- SUITABLE FOR HOME, FACTORY, SHOP LOT, CAR PARK LOT AND ETC USE
TYPE A
- The TCS3200 is TCS230 upgraded version better
- Power supply 3-5v
- Resistance to light interference
- White LED can be controlled on, off.
- Can detect non-luminous object color
- Best detection distance 1cm
TYPE B - Color Sensor Specifications
- Supply Voltage:2.7V- 5.5V.
- Communicates Directly With a -Microcontroller/Arduino.
- High-Resolution Conversion of Light Intensity to Frequency.
- Power Down Feature.
- Programmable Color and Full-Scale Output Frequency.
-
Specification:
- Color: Black
- Voltage: 2.0 V
- Weight: 118 g
- Material: Copper
- Screen Type: 3D, , Plasma TV, LED, LCD
- Length: 1 and 3 Meter
- Cable Type: HDTV
- HDMI to HDMI cable
- male to male connection
- 19 pin design
- compatible with all electronics
- Digital interface for full video and audio transfer
Support for multiple cascaded without hardware setup
o RGB color display and supports three kinds of mixed colors
o Dot sequence using Cartesian coordinate system, easy to understand
o Arduino development board supporting separate power supply or an external power supply
o When multiple cascading use, if the color is too dark, the supply voltage can be increased to about 5.2v. Do not exceed 5.4V
o When multiple cascading, all data lines connected to the 1st sub- board. (The origin (0,0) where the sub-board for the 1st sub-board)
- Wireless 802.11 b / g / n standard
- Support STA / AP / STA + AP three operating modes
- Built-in TCP / IP protocol stack to support multiple TCP Client connections (5 MAX)
- D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
- AD0: 1 channel ADC
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Current: continuous transmission: 70mA (200mA MAX), Standby: <200uA
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Remote firmware upgrade (OTA)
- Support Smart Link Smart Networking
- Working temperature: -40 deg ~ + 125 deg
- Drive Type: Dual high-power H-bridge driver
- Type: Pillow Block
- Bore Size: 16 mm
- Brand Name: NTN Corperation Made in Japan
- Model Number: UCP203
- Part name: wholesale Low price UCP 203 P203 pillow block bearing for sale
- Series: UCP, UCF.UCP.UCFL.UCPA.UCLP.UCPW.UCPX.UCFS.SAFT series
- Bearing Material: Chrome Steel GCR15 / Stainless Steel
- Cage: Steel Cage
- Housing material: Cast Iron
- Bearing Precision: P0/P6/P5/P4
- Structure: pillow block bearing
- Hardness: HRC61-HRC65
- pillow block application: machinery
· Pixel Color :Red, Green, Blue per dot
· Size:60x60mm
· Pixel Diameter: 5mm Led Diameter
· Type: Common Anode
- 0.3μm Alloy iron coating thickness
- 0.2μm Chrome and nickel coating thickness
- Tip length: 17mm
Size: 86x86mm, UK type.
- 1 port/ 2 Port/ 4 Port
- Slotted Mounting Holes.
- Required Separate Keystone Jack Module
- Mounting Screws, Labels included.
- Meets ANSI/TIA/EIA 568B.2
- Material: ABS
- Color: White
Cables can enter and terminate at 90 degrees or degrees. The universal line sequence tag supports the T568A/T568B port connection. It is compatible with the panel used by the 110 type information module and meets ROHS requirements.
UL Certification Document Number: E81956 Tested and certified by an independent agency, ETL/SEMKO.
RJ45 type:
-CAT5
-CAT5E
-CAT6
Cables can enter and terminate at 90 degrees or degrees. The universal line sequence tag supports the T568A/T568B port connection. It is compatible with the panel used by the 110 type information module and meets ROHS requirements.
UL Certification Document Number: E81956 Tested and certified by an independent agency, ETL/SEMKO.
RJ45 type:
-CAT5
-CAT5E
-CAT6