Latest Products
Sort by
Show result
  • Type: Hose to Hose
  • Mode: PU 
  • Fluid Type:Air / Vacuum
  • Fit For Tube Material: PU / Nylon, Polyurethane
  • Material: Plastic
  • Color: Black/Blue
RM1.00
  • Load capacity: Resistive ≤80W, Inductive ≤40W. 
  • Own power: < 0.016W/h. 
  • Working Temperature: -20°C- +50°C. 
  • Sensor degree: 140°Cone angle . 
  • Only applicable to DHT22/AM2302
  • 3 wires connection. 
  • Light control sensors: 5LUX-500LUX(adjustable). 
  • Working Distance: approx. 7m/ 22.96 feet.
RM5.20
  • Sensor Type: Reed sensor module
  • Model Name: KY-021
  • Voltage: 3.3V to 5V
  • Color: Black
  • Size/Dimension: 3.2 x 1.9 x 0.7 cm
RM3.50
  • I2C interfaces
  • Power supply:3.3v ~ 5v
  • a low supply current max of 0.6mA
  • Board Size: 1.7×1.3cm(approx)
  • Material: Plastic + iron
  • Wide operating temperature range: -40°C to 85°C
RM21.40
  • Material:Zinc Alloy
  • Centeral Axle:Stainless Steel
  • Size:   

                 HL-226-3A:40*40

RM5.00
  • Working voltage:DC 5V
  • Digital signal: Output
  • Hole diamere: 2.5mm
  • Small size, high efficiency
RM5.50
  • Type: Emax ES08MA II
  • Size: 23 x 11.5 x 24 mm (1.25 x.45 x.94in)
  • Weight: 12g / 0.42oz
  • Working voltage: 4.8V~6.0V
  • Working current: 200mA/60°
RM19.50
  • Four LEDs
  • Three pushbuttons
  • A reset button
  • A piezo-buzzer
  • An LED display module (four-digit, seven-segment)
  • Two serial LED display driver ICs(74HC595)
  • A multi-turn trimpot (10K)
  • A port for DS18B20 temperature sensor
  • A port for TSOP1838 infrared receiver module
  • A APC220 wireless module interface (serial/UART interface)
RM8.50
  • Type: 18650
  • Nominal voltage: 3.7V
  • Size: 18*65(mm)
  • Nominal capacity: 2000mAh
RM7.50
  • Master :ESP-01S 
  • Temperature and humidity sensor: DHT11
  • Operating voltage: DC 3.7V-12V (support 3.7v lithium battery power supply)
  • Measuring range: 20-90% RH 0-50 ℃
  • Measurement accuracy: Temperature: ± 2 ℃ Humidity ± 5% RH
RM14.00
  • AWG: 26
  • Conductor Construction: 7/ 0.11mm
  • Diameter mm: 49
  • Insulator Thick: 0.41
  • Over Diameter mm: 1.3
RM1.00
  • AWG: 28
  • Conductor Construction: 7/ 0.11mm
  • Diameter mm: 39
  • Insulator Thick: 0.41
  • Over Diameter mm: 1.2 
RM0.80
  • Voltage: 1000V Maxi Peak Forward Voltage: 1000V
  • Max Reverse Current : 10A
  • Frequency: High Frequency
  • Power: small power.
  • Material: silicone, copper, plastic.
RM1.80

Specification:

  • Condition: 100% Brand New
  • Item Type: Dust Blower
  • Color: As picture shown
  • Guns Tube Material: Stainless Steel
  • Guns Handle Material: PP Plastic
  • Dust Blower Piston Material: PP Plastic
  • Working Pressure: 18Mpa
RM8.50

Specification:

  • Material: Metal
  • TorqueSize: 6mm
  • Voltage: DC12V
  • Speed:6/160/375 RPM
RM32.00