Latest Products
Sort by
Show result
  • Resistive Material: Cermet
  • Mounting Type: Through Hole
  • Termination Style: PC Pins
  • Power Rating: 0.5W
  • Series: 3386
  • Minimum Operating Temperature: -55°C
  • Maximum Operating Temperature: +125°C
RM1.50
  • Material: Copper + Plastic
  • Item Size: 176 x 20 x 10mm
  • Item Weight: 18g
RM5.30

M3 Stainless Steel Hex Nut Hexagon Nuts Metric Thread Suit For Screws Bolts

Descriptions:
Material: Stainless Steel
Size: M2.5/M3/M4/M5/M6/M8

Usage:
Suitable for connection of machine, home decoration, automobile

RM1.20
  • Module size: 2.5cm * 1.9cm.
  • with a light switch, there is a collision, lights, no collision lights out. 
  • VCC:  3v-12v power supply 
  • GND:  then the power ground 
  • OUT:  high and low output 
RM3.60

Specification:

Product Name : Hexagon Standoff Spacer
Thread Size : M3
Total Size : 
Material : Nylon
Color : White

RM0.20

Specification

Name: M3 Female White Nylon Hex Hexagonal Female Thread PCB Standoff Spacers
Material: Nylon
Fire rating: 94V-2
Temperature: -20℃~-120℃
Size (mm): M3*5, M3*6, M3*8, M3*10, M3*12, M3*15, M3*18, M3*20, M3*25, M3*30, M3*35, M3*40

RM0.20
  • Power Sources
    • Any +3.3V pin (+3.3V)
    • Any +5V pin (+5V)
    • USB connector (+5V)
RM21.50
  • Wireless Module: ESP32-S WiFi 802.11 b/g/n + Bluetooth 4.2 LE module with PCB antenna, u.FL connector, 32Mbit SPI flash, 4MBit PSRAM.
  • External Storage: micro SD card slot up to 4GB.
  • Image Format: JPEG( OV2640 support only ), BMP, grayscale.
  • Expansion: 16x through-holes with UART, SPI, I2C, PWM.
  • Misc: Reset button.
  • Power Supply: 5V via pin header.
  • Support for OV2640 (sold with a board) or OV7670 cameras.
  • Camera
  • FPC connector.
  • LED flashlight.
RM26.80
  • Working voltage: VCC 4.5~5.5V
  • Current: 0.2~200mA
  • Interface electrical level: 3.3V / 5V
  • Onboard 3.3V voltage regulator circuit
  • Supports Micro SD up to 2GB
  • Micro SDHC up to 32GB
  • Pinouts: GND, VCC, MISO, MOSI, SCK, CS; SPI standard interface
  • 4 M2 2.2mm screw installation holes
RM4.50
  • MOSFET input voltage: 5 - 36V
  • Maximum current: ~ 15A (with good cooling installation up to 30A peak possible)
  • Can be controlled with signals between 3.3V and 20V (5V or higher recommended for a lower drain-source resistance)
  • Has two 2mm holes for mounting
  • Dimensions: 34x17x12mm
RM5.50
  • Model: GY-302 
  • Dimensions: 13.9mm X 18.5mm 
  • Original BH1750FVI chip using ROHM 
  • Power supply :3-5v 
RM6.50
  • USB to UART TTL
  • CH340 IC
  • V_USB is 5.0V while TX and RX are 5.0V too
  • Cable length: 1 meter
RM6.90
  • On-board LM358 chip
  • Adjustable gain up to 100x
  • On-board 10K adjustable resistor for gain adjustment
  • On-board power indicator
  • Chip has been drawn out to the main pins for direct input and output of signals
  • Working Voltage Range: 5 V to 12 V
  • Board Size: 32.7 x 13.3 mm
RM4.80

Specification:

  • Material: Nylon Hair+Wood
  • Color: As Picture

Size:

  • Bush Length: 13cm, Hair Length: 2.9cm; Hair Width: 1.5cm
RM1.75
  • MODEL : AR2000-02
  • PORT SIZE ; 1/4"
  • RATED FLOW ; 550 L/min
  • PRESSURE GAUGE PORT SIZE ; 1/8"
  •  MAX. WORKING PRESSURE ; 15 kgf/cm
  • WORKING PRESSURE ; 0.5 ~ 8 kgf/cm
  • ENVIRONMENT TEMP ; 5 C ~ 60 C
  • BODY MATERIAL ; DIECASTING ALUMINIUM
  • SIZE ; L 40 mm x W 40 mm x H 92 mm
  • WEIGHT ; 0.27 Kg
RM32.90