Latest Products
Sort by
Show result

IMAX B6 80W Balance Charger/Discharger 1S-6S with 12V 6A adapter

Specifications:
1.  Operating voltage range: DC 10.0~20.0 Volt (more than 6A)
2.  Circuit power: Max. charge power 80W / Max. discharge power 10W
3.  Charge current range: 0.1 ~ 6.0A
4.  Discharge current range: 0.1 ~ 2.0A
5.  Current drain for balancing lipo: 300mAh/cell
6.  NiCd/NiMH battery cell count: 1 ~ 15cell
7.  li-ion/Polymer cell count: 1 ~ 6 series
8.  Pb battery voltage: 2V ~ 20V
9.  Net weight: 277g (charger only)
10. Dimensions: 133X87X33mm


Description:
• Microprocessor controlled Delta-peak sensitivity.
• Individual cell balancing Li-ion, LiPo and LiFe capable Ni-Cd and NiMH capable
• Large range of charge currents Store function, allows safe storage current
• Time limit function
• Input voltage monitoring. (Protects car batteries at the field)
• Data storage (Store up to 5 packs in memory)
• Battery break in and cycling.
• Support new generation A123 system (LiFe) battery

Package Included:
1x Ac Power (6A)
1x Type A Plug Adapter 
1x 80W IMAX B6 Battery Balance Charger
1x cable set
1x Universal Adapter

RM98.00
  • Modle:PB05A
  • Circuit :SPST 
  • Rating:1A/36VDC
  • Rating:1A 125VAC/0.5A 250VAC 
  • Dielectric withstanding voltage :1000VAC for 1 minute 
  • Contact resistance:100mΩ Max. (Initial) 
  • Insulation resistance :100MΩ Min. 
  • Operating force :400± 100gf 
  • Full travel:2.0mm± 0.5mm 
  • Operating Force: Over 10,000 Cycles Min
  • Manual Welding :256℃ for 3 seconds 
  • Function: Maintained
  • Operating temperature :-20℃ ~+70℃ 
  • Switch Contact: 1NO (Normal Open. Press ON,Press again OFF)
RM1.80

PRODUCT DESCRIPTION:

order bin:  3W 850nm LED Chip

Forward Voltage: DC 1.4-1.7V

Forward Current: 500mA

Color:  infared (850nm)   

Beam Anlge: 125degree

RM3.20
  • Input voltage: DC 12V-40V
  • Power: 0.01-400W
  • Current: rated current 8A, maximum through current 10A, quiescent current 0.02A (standby state)
  • Frequency: 13khz
  • PWM pulse width speed regulation range: 10%-100%
  • Size: 60*55*28mm
RM11.80

Manufacturer: ATTEN

Part No.: T900-B

Dimension:

  • Length: 43 mm
  • Inner dia.: 4.0 mm
  • Outer dia.: 6.3 mm
RM12.30
  • Model Number: 3590
  • Type:Rotary Potentiometer
  • Technology: Wirewound
  • Resistance: 500~100K
  • Resistance Tolerance: 5% 2%
  • Rated Power: 2W
  • Max. Operating Voltage: 500V
  • Operating Temperature: -55℃~+125℃
RM8.30
  • Product Name: USB Tester (Current & Voltage Test Meter)
  • Model: KWS-10VA
  • Voltage: 3-20V±1%
  • Current: 0-3A±1%
  • Colour: black
  • Material: ABS
RM14.70
  • Gender: Male

  • Pitch 2.54mm
  • Number of Pins: 64 Pins ( 2 x 32 Pin )
  • Body Orientation: Stright
RM12.00
  • Supported Frequency Bands: 2.4GHz
  • Antenna Physical Form: Whip
  • Physical Form: Whip
  • Antenna Mounting Type: Direct
  • Mounting Type: Direct
  • Connector Type: SMA
  • Connector Gender: Male
RM4.40
  • Supply current: 3A
  • Voltage: 5V
  • Power: 15W
  • Interface: Type-c
  • Colour: Black
RM5.80
  • Name: Power Adapter
  • Connector Type: IEC 320
  • C13 Terminal: 3
  • Terminals Rated Voltage: AC 250V
  • Current: 10A
RM6.50
  • 5 V power supplied by a USB connector
  • USB 2.0 full speed compatible interface
  • USB standard A to mini B cable
  • Direct firmware update feature supported (DFU)
  • Status LED which blinks during communication with the PC
  • Operating temperature 0 to 50 °C
RM58.50
  • Specifications: (140pcs )

  • Material: Polyolefin
  • Internal diameter: 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
  • Shrinkage Ratio: 2:1 (Max. shrink to 1 / 2 of its supplied diameter )
  • Length: 30mm, 65mm, 90mm
  • Minimum starting Shrinkage Temp: +70℃
  • Minimum full Shrinkage Temp: +125℃
  • Tensile strength: 10.4 Mpa
  • Dielectric strength: 15kV / mm
  • Cutting method: Scissors or sharp knife
  • Flammability: Flame retardant
  • Five Color in total: Yellow, White, Black, Green, Red
  • Box size: Approx. 17.2x9.8x2.2cm/ 6.77x3.86x0.87''
  • Features: 

  • A set assortment of 140 pcs of Polyolefin heat shrink tubing.
  • Come with box, easy to store or use, may also be reuse.
  • 2:1 shrink ratio and a 600V pressure-bearing rating.
  • Handy item for the Technician or Hobbyist work bench, car or van.
  • Specification: ( 580pcs )

    Item Type: Heat S

    hrink Tubing

     Material: Rubber Shrinkage Ratio: 2:1

    Flame Retardancy: VW-1

    Temperature Resistance: 125℃

    Withstand Voltage: 1kv

    Feature:

    1. ELECTRICAL INSULATION: Suitable for electrical insulation, wire bundling, color coding, mechanical protection, wire or cable joints and daily maintenance, etc.

    2. QUICKLY MELTED BY HEATING: The heat shrinkable tube cable can be quickly melted by heating, so that can fit your items more closely and avoid damage

    3. 2:1 SHRINKAGE RATIO: The shrinkage ratio is 2:1, which surrounds the object more closely, very practical and useful

    4. FRICTION PROOF: Casing shrink tube set has many good advantages, such as friction proof, aging proof, corrosion proof, waterproof, environmental protection, and insulation

    5. WIDELY USED IN INSULATION PROTECTION: Widely used in insulation protection of wiring harness, solder joints, inductors, and rust proof

RM11.70

Specification:

● Name:  42 Stepper Motor
● Size:42*42*40mm
● Model:42HD4027-01
● Weight:275g/pc
● Length:40mm
● Port of wires:6 pins female PH2.0
● Number of phase:2
● Step Angle:1.8°
● Holding Torque:400mN.m
● Rated voltage:3.3V
● Rated current:1.5A
● Insulation class:Class B (130°)
● Inductance per phase:3.8mH±20%
● Resistance per phase:2.2Ω±10%

RM32.60

Features:
* Gold plated banana plug, gold plated ensures minimum signal loss.
* Looks upscale and beautiful on the outside.
* Diameter of gold-plated double banana plug: 4mm
* Double screws locking.

Note: Due to manual measurement, there may be an error of 1-3mm.

Specification:
Type: Banana plug
Material: Gold-Plated
Tail Color: Black
 

RM2.80