Latest Products
Sort by
Show result

 

Features Three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs Three 16-bit ADCs for digitizing the accelerometer outputs Three 16-bit ADCs for digitizing the magnetometer outputs Gyroscope full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps) Accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g Magnetometer full-scale range of ±4800μT I2C and SPI serial interfaces Power supply: 3-5v Applications TouchAnywhere™ technology (for “no touch” UI Application Control/Navigation) MotionCommand™ technology (for Gesture Short-cuts) Motion-enabled game and application framework Location based services, points of interest, and dead reckoning Handset and portable gaming Motion-based game controllers 3D remote controls for Internet connected DTVs and set top boxes, 3D mice Wearable sensors for health, fitness and sports

RM33.50

Product description

  • Embed version of Mega 2560 CH340G/ATmega2560 - compatible with Arduino Mega 2560 board. Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G.
  • Board have compact size 38x55mm. It is good solution, to make your final project on solder proto-board.
  • Board for functionality similar to the Arduino Mega 2560. It is embed board, but the same stable, and uses the original chips ATmega2560 (16 MHz).
  • The board used the chip CH340G as converter UART-USB. When you work in the frequency 12Mhz, giving a stable result of data exchange (need install drivers to computer).
  • Mega PRO (Embed) 2560 CH340G / ATmega2560 - connects to the computer via microUSB cable (used for almost all Android smartphones).
  • You can supply power to board through the MicroUSB connector or to power pinheaders.
  • The voltage regulator (LDO) can deal with incoming voltage from 6V to 9V (peack 18V) DC. Output current for 5V - about 800mA, for 3.3V - about 800mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects.
RM59.90

 Specifications


Model: MB-233
Rated Voltage: DC12V/ DC24V
Light Color: RED/ GREEN /YELLOW/
Size : top 14mm x L42mmX B9mm

RM1.10

Size: 65 x 65 mm (2.5 x 2.5”)

Thickness: 3mm (1/8″).

V-Slot Profile: 2020 & 2040.

RM27.90

Precautions:
1. This module is a boost module, the output voltage should be greater than the input voltage
2. The peak current output current does not exceed 2A

RM2.90

Features

  • Allows your robots to move in Omni-direction (back and forth, sideways and rotates at the same position).
  • Made of high‑quality ABS and rubber materials for smooth running and better gripping.
  • Compatible with TT motor.
RM28.50

Specification


Type: Nano Tape
Adhesive Type: Acrylic
Adhesive Side: Single Sided Adhesive
Thickness: 0.5MM
Width: 50MM /20mm

 

RM8.50

Color: Random Color Size: about 7cm Applicable age: over 4 vears old instruct: 1. Make the ratio according to the paint color you took, import between paints, do not stir. 2. Slowly and evenly adjust the color to the bottom. 3. Leave it to dry [can be placed in the living room/bedroom/ dining room, etc. Packaging includes: White Bear Keychain*1 3 Color Pigments*1 Pen*1 Spoon*1 Storage box*1

RM3.90

Specifications

  • Length pins: 10.5mm
  • Height (female part): 8.5mm
  • Dimensions: 51.1 x 5 x 19mm
RM4.20

Model: LA42DWQ-22
Aperture:22mm
Resistance: 1K 2K 10K 20K 100K

RM8.50

1. Set the start voltage:

Normal display voltage state, press to a starting voltage button ,to display the start charging voltage. long Press the start button, digital flashes, by start and stop button, set the start charging voltage value.

2. Set Stop voltage:

Normal Voltage normal display mode, press to a Stop voltage button ,to display the Stop charging voltage. long Press the Stop button, digital flashes, by start and stop button, set the Stop charging voltage value.

3. Setting Error:

Energized state while holding down the start / stop button, digital display 888, which is the factory setting.

 

RM18.50

Input voltage: (InVCC) DC 5 ~ 24 V
Current consumption: 5mA
Output voltage(High level): InVCC
Output voltage (Low level): 0V
Output current: 1 ~ 50mA
Response time: 500mS
Working temperature: 0 ~ 100 degree
Induction thickness (Sensitivity) Range: 0 ~ 20mm
Communication: RS485
Humidity: 5% to 100%
Material: ABS
Waterproof: IP67

RM44.00