RM55.00
Maker UNO Edu Kit (Arduino Compatible)
Price RM55.00
Product SKU ARD-00010
Brand Cytron
Size (L x W x H) 15 cm x 10 cm x 4 cm
Reward Points 55
Points Needed 2200
Availability 5
Quantity
Description
Highlight
  • Maker UNO X 1
  • USB Micro B Cable X 1
  • LED 5mm Red X 3
  • LED 5mm Yellow X 3
  • LED 5mm Green X 3
  • Breadboard Half Size X 1
  • Dupont 40 Pins Male to Male Jumper Wire X 1
  • Resistor 0.25W 5% (220R) X 10 
  • Resistor 0.25W 5% (1K) X 5 
  • Resistor 0.25W 5% (10K) X 5
  • LDR X 1 
  • Transistor 2N2222 X 1 
  • Finger Adjust Preset 10K X 1
  • 3V~5V DC Motor 130 X 1
  • Miniature Fan Blade X 1
  • Plastic Box X 1

Overview:

Description:

Maker UNO was 1825% funded in KickStarter on 17 April 2018. Thank you to the 1878 backers for your support! Issues that faced by Teachers During Arduino Classes...

  1. Most Students does not have basic knowledge in electronics.
  2. They do not understand the circuit diagram at the beginning of the Arduino lesson. They will spend a substantial amount of time just to connect the wires and troubleshoot the connections.
  3.  it's a mess after every class. The teacher has to sort and make sure nothing is missiong. What a tedious job and a waste of time!

To solve this, Maker UNO has introduced. With this, students can skip the hassle of constructing the basic electronic circuit which is boring and time consuming. Although it is equally important for them to learn about basic electronics, it can always come later after they have experienced how easy it is to create awesome project. Start with fun and excitement. Start coding right away and see your board lights up and plays melody with the press of a button. Besides, not only do the onboard LEDs work as outputs, they can also act as indicators, clearly showing what's happening on that pin. When the pin is used as input, you can clearly see whether the signal is received by just looking at changes on the LEDs

Addtional Features:

One of the brilliant features of the official Arduino Uno is the label printed on its pin headers. It saves us a lot of time when we want to connect the I/O pins to the external circuit. So, we include a set of these label stickers for pin headers in each of the Maker UNO! (Please note that you need to peel off the stickers and stick them on your Maker UNO by yourself)

Students always get their boards mixed up. With Maker UNO, you can write your name on the board. Problem solved!

Maker UNO uses the common Micro USB cable which is basically everywhere.

Don't throw your box away! There is a small opening on the box for you to plug the USB cable so that you can keep your Maker UNO safely in the original box, no additional casing required.Specification:

  • Microcontroller : Atmega328P
  • Programming IDE: Arduino IDE
  • Operating Voltage : 5V
  • Digital I/O Pins: 20
  • PWM Pins : 6
  • Analog Input: 6 (10-bits)
  • UART, SPI, I2C : 1
  • External Interrupt: 2
  • Flash Memory: 32KB
  • SRAM : 2KB
  • EEPROM/ Data Flash : 1KB
  • Clock Speed: 16 MHz
  • DC current per I/O Pin 20 mA
  • Power Supply: USB Only!
  • DC Current 5V: USB Source
  • DC Current 3.3V: 500 mA
  • USB to Serial Chip: CH340G
  • Programmable LED: 12 x from digital Pin 2 to 13
  • Built in Programmable Push Button and Piezo Buzzer.

Comparison Between Arduino UNO R3 or and Maker UNO:

Documents:

You May NEED:

Tutorials:

 

Reviews (0)
view all
back
0
0 reviews
What's in the box

1 Units of Maker UNO Edu Kit (Arduino Compatible)