Search result
Sort by
Show result
  • 2 Mbit/s rate of the peak current of 12.5mA received
  • In the 2Mbit/s rate @ 0dBm output peak current of 11mA
  • 400nA power down mode
  • 32uA standby mode power consumption
  • 130us fast switching and wake-up time
  • With on-chip voltage regulator
RM22.50
  • Low-power consumption character LCD
  • Display Format: 20 Characters x 4 lines.
  • Suitable for  Arduino based project.
RM25.00
  • No mechanical movement
  • Fast and precise response
  • Input: 3V-32V DC
  • Current: 25A
RM28.00
  • Power Supply: 3.6VDC to 6VDC
  • Passkey: 1234
  • Operating Current: 30mA
  • Communication range: 10 meters
  • Dimension: 16 x 38mm
RM22.50
  • Plug-and-play heart-rate sensor for Arduino
  • Easily incorporate live heart-rate data
  • Combines a simple optical heart rate sensor with amplification and noise cancellation
RM21.70
  • Material: High Quality Carbon Steel
  • Type: Long Nose with teeth
  • Length: 8 inch
  • Durable
  • Multipurpose
RM29.00
  • Motor type : 3 pole
  • Operating voltage 4.8V-7.2V
  • Digital Modulation (PWM control)
  • 225 Degree
RM25.00

1 unit of 16 Channel I2C IIC PWM Multiple DC Servo Motor Driver , Arduino

RM23.80
  • Norminal Voltage: 3.7V (fully charged at 4.2V)
  • Actual Capacity: 1300mAh 
  • Low discharge rate, tested in lab: ~1.5A for 30 seconds
  • 18650 size: 18mm diameter and 67.5mm length
RM22.00

1 unit of AC 220V 50HZ 2 Terminals 2P Washing Machine Solenoid Valve FCD-90A

RM28.90
  • Model: JTH-1230B
  • Color: Black
  • Type: UK (Malaysia Standard)
  • Input: AC 110V - 240V 50/60Hz
  • Output: DC 12V 3A
  • Output polarity: Inside positive (+), Outside negative (-)
  • Short circuit protection and steady
  • Wire length: 1 m
  • DC jack diameter: 25mm (inner), 55mm (outer) 
  • Dimension: 9.5 x 6.0 x 7.0 cm
RM22.80
  • Model: JTH-2410B
  • Color: Black
  • Type: UK (Malaysia Standard)
  • Input: AC 110V - 240V 50/60Hz
  • Output: DC 24V 1A
  • Output polarity: Inside positive (+), Outside negative (-)
  • Short circuit protection and steady
  • Wire length: 1 m
  • DC jack diameter: 25mm (inner), 55mm (outer) 
  • Dimension: 9.5 x 6.0 x 7.0 cm
RM20.00

Microcontroller

W5100

Operating Voltage

5V

Input Voltage (recommended)

7-12V

Input Voltage (limits)

6-20V

Digital I/O Pins

14 (of which 4 provide PWM output)

 

Analog Input Pins

6

DC Current per I/O Pin

40 mA

DC Current for 3.3V Pin

50 mA

Flash Memory

32 KB (ATmega328) of which 0.5 KB used by bootloader

SRAM

2 KB (ATmega328)

EEPROM

1 KB (ATmega328)

Clock Speed

16 MHz

RM29.50
  1. Wireless 802.11 b / g / n standard
  2. Support STA / AP / STA + AP three operating modes
  3. Built-in TCP / IP protocol stack to support multiple TCP Client connections (5 MAX)
  4. D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
  5. AD0: 1 channel ADC
  6. Power input: 4.5V ~ 9V (10VMAX), USB-powered
  7. Current: continuous transmission: 70mA (200mA MAX), Standby: <200uA
  8. Transfer rate: 110-460800bps
  9. Support UART / GPIO data communication interface
  10. Remote firmware upgrade (OTA)
  11. Support Smart Link Smart Networking
  12. Working temperature: -40 deg ~ + 125 deg
  13. Drive Type: Dual high-power H-bridge driver
RM24.80
  • ATmega 328P microcontroller
  • Operating Voltage = 5V
  • Input voltage = 7-12V (recommended)/ 6-20V (limited).
  • Output Voltage = 5V / 3.3V (50mA DC current)
  • 14 digital I/O pins (6 provide PWM output- 3,5,6,9,10,11)
  • 6 Analog Input pins (0 to 5)
  • Supply 40mA of DC current per pin
  • 16 MHz crystal oscillator (clock speed)
  • 32KB flash memory (0.5KB for bootloader/ 2KB SRAM/ 1KB EEPROM)
  • Free USB B Type Cable
RM25.50