Raspberry
Sort by
Show result

Specification:

  • Material: ABS
  • Input Voltage: AC 100-240V 50/60Hz
  • Output Voltage: DC 5V 2.5A(2500mA)
  • Fixed Switching Voltage with low noise, more reliability and stability.
  • Portable to Carry 
  • UK Type Power Supply Adapter coming with Micro USB Cable (power cable)
RM19.90
  • Color: Red and White
  • Cut-outs of all connection points
  • Plastic LED light protector
  • MicroSD card cut-out
  • Stick on rubber feet for case stability
  • Compatible: All RAM size Raspberry Pi 4 Model B boards
RM16.50

1 unit of Official Casing for Raspberry Pi 2/3

RM15.00
  • Broadcom BCM2837 64bit ARM Cortex-A53 Quad Core Processor SoC running @ 1.2GHz
  • 1 GB RAM
  • 4 x USB2.0 Ports with up to 1.2A output
  • Expanded 40-pin GPIO Header
  • Video/Audio Out via 4-pole 3.5mm connector, HDMI, CSI camera, or Raw LCD (DSI)
  • Storage: microSD
  • 10/100 Ethernet (RJ45)
  • BCM43143 WiFi on board
  • Bluetooth Low Energy (BLE) on board
  • Low-Level Peripherals:
    • 27 x GPIO
    • UART
    • I2C bus
    • SPI bus with two chip selects
    • +3.3V
    • +5V
    • Ground
  • Power Requirements: 5V @ 2.4 A via microUSB power source
  • Supports Raspbian, Windows 10 IoT Core, OpenELEC, OSMC, Pidora, Arch Linux, RISC OS and More!
  • Dimensions: 85mm x 56mm x 17mm
RM165.00
  • Broadcom BCM2837B0, 64-bit ARM Cortex-A53 Quad Core Processor SoC running @ 1.4GHz, with metal body for better heat dissipation.
  • 1GB LPDDR2 SDRAM
  • 4 x USB2.0 Ports with up to 1.2A output
  • Expanded 40-pin GPIO Header
  • Video/Audio Out via 4-pole 3.5mm connector, HDMI, CSI camera, or Raw LCD (DSI)
  • Storage: microSD
  • Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
  • Power-over-Ethernet (PoE) support (requires separate PoE HAT)
  • 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
  • Power Requirement, 5V/2.5A via microB USB connector.
  • Supports Raspbian, Windows 10 IoT Core, OpenELEC, OSMC, Pidora, Arch Linux, RISC OS and More!
  • Dimensions: 85mm x 56mm x 17mm​
RM166.00
  • Processor:  Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
  • Memory:    1GB, 2GB or 4GB LPDDR4(depending on model)
  • Connectivity: 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless, LAN, Bluetooth 5.0, BLE, Gigabit Ethernet
  • 2 × USB 3.0 ports
  • 2 × USB 2.0 ports
  • Input power: 5V DC via USB-C connector (minimum 3A) or 5V DC via GPIO header (minimum 3A)
  • Power over Ethernet (PoE)–enabled(requires separate PoE HAT)
RM240.00
  • Broadcom BCM2711, 64-bit ARM Cortex-A73 (ARMv8), Quad-core, 28nm Processor SoC running @ 1.5GHz c/w metal body for better heat dissipation.
  • LPDDR4 4GB SDRAM
  • USB 3.0 Port + 2 x USB 2.0 Port
  • Expanded 40-pin GPIO Header
  • 4-pole 3.5mm Connector
  • 2 x Micro HDMI Port, support 4Kp60 videoDual Display
  • Raw LCD (DSI)
  • CSI Port for Image / Camera input
  • Storage: Micro SD Card
  • True Gigabyte Ethernet Port up to 900Mbps or MORE !!!
  • POE (Power-Over-Ethernet) support, requires seperate POE Hat
  • 2.4GHz & 5GHz IEEE 802.11.b/g/n/ac Wireless LAN.
  • Bluetooth 5.0 & BLE (Bluetooth Low Energy)
  • Power Requirement: 5V 3A via USB Type C Cable
  • Supports Raspbian (Check 3rd Party Operating System here.
  • Dimension: 85mm x 56mm x17mm
RM265.50

Specification

  • Model: CTD-050300A
  •  Output: DC 5V 3.0A
  • DC plug: USB type C
  • Cable length: 100cm
  • Input: 100V~240V, 50Hz~60Hz
  • Output: DC 5V/ 3000mA (3A)
RM30.00
  • Fully Compatible with Both the Model A and Model B Raspberry Pi
  • 5MP Omnivision 5647 Camera Module
  • Still Picture Resolution: 2592 x 1944
  • Video: Supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90
  • Recording: 15-pin MIPI Camera Serial Interface - Plugs Directly into the Raspberry Pi
RM36.80

1 unit of T-Cobbler Breakout + 1 unit of 40 Pin GPIO Cable

RM15.70