Specification: 

• Input Voltage: DC 5-30V
• Input Current: 8A ( Maximum )
• Static Operating Current: 4mA
• Output Voltage: DC 1.25-30V
• Output Current: 10A(max)
• Output Constant Current Range: 0.2-10A
• Working Temperature: -40~85 degrees
• Working Frequency: 150KHz

• Model Number: 17HS19-2004S1
• Motor Type: Bipolar Stepper
• Step Angle: 1.8 deg
• Step Accuracy: 5%
• Holding Torque: 59Ncm(84oz.in)
• Rated Current/phase: 2.0A
• Voltage: 2.8V
• Phase Resistance: 1.4ohms
• Inductance: 3.0mH ± 20%(1KHz)
• Weight: 400g

• Rated Voltage: 11.1V 
• Capacity: 3000mAh (3.0 Ampere Hour)
• Maximum discharge rate: 35C
• Able to use for most of the 12V controllers, motors or any other appliances
• Must be charged with designated LiPo Battery Charger
• Recommended Charging Rate:  0.5 - 1.5A
• If it is not used for a long time, please maintain the voltage at 11.4V, the recommended storage voltage.
• Weight: ~ 200gram
• Dimension: 100mm x 32mm x 27mm (Not including cables)

• Operating Voltage: 4.8V to 6.0V DC
• Speed: 0.1 s/60° @ 4.8V without load
• Torque:  1.8 kg.cm (~0.1765 N.m) @ 4.8V
• Rotation Angle: 0°- 180°
• Gears Material: Metal
• Compatible with Arduino Servo Motor Library
• Wiring:
  • RED: 5V
  • BROWN: GND
  • ORANGE: SIGNAL
• Weight: 16g
• Dimension: 22.3 x 11.8 x 28.3 mm

• Compatible with standard (dual 5/3.3V) and 3.3V-only boards.
  • Arduino Uno R3 
  • Arduino Mega 2560.
  • Arduino Diecimila/Duemilanove 
• Support:
  • HID devices, such as keyboards, mice, joysticks, etc.
  • USB to serial converters - FTDI, PL-2303, ACM, as well as certain cell phones and GPS receivers
  • ADK-capable Android phones and tablets
  • Digital cameras - Canon EOS, Powershot, Nikon DSLRs and P&S, as well as generic PTP
  • Support for more devices is currently in development.

• Arduino programming language
• Basic circuit theory.
• Basic knowledge before programming
• Simple projects for easy understanding

• Date: 20/12 & 21/12 (Friday & Saturday)
• Time: 9.00am - 12.00pm
• Fees: RM150
• Venue: Techmakers Academy
• Address: 31-2nd Jalan Dato Ismail, 11900 Bayan Lepas Penang
• Things to Bring: A laptop & materials purchased at the last stemsel Bootcamp.

• Date: 04 December 2019 (Wednesday)
• Time: 9.00am - 1.00pm
• Fees: RM200 (inclusive of a robotic car, STEMSEL inventor kitset, refreshment and a certificate)
• Venue: Techmakers Academy
• Address: 31-2nd Jalan Dato Ismail, 11900 Bayan Lepas Penang
• Things to Bring: A laptop

• Date: 12/12 & 13/12
• Time: 9.00 am to 1.00 pm
• Venue: Techmakers Academy
• Address: 31-2nd Jalan Dato Ismail, 11900 Bayan Lepas Penang
• Things to Bring: A laptop

Specification

• Model: CTD-050300A
•  Output: DC 5V 3.0A
• DC plug: USB type C
• Cable length: 100cm
• Input: 100V~240V, 50Hz~60Hz
• Output: DC 5V/ 3000mA (3A)

• Broadcom BCM2837 64bit ARM Cortex-A53 Quad Core Processor SoC running @ 1.2GHz
• 1 GB RAM
• 4 x USB2.0 Ports with up to 1.2A output
• Expanded 40-pin GPIO Header
• Video/Audio Out via 4-pole 3.5mm connector, HDMI, CSI camera, or Raw LCD (DSI)
• Storage: microSD
• 10/100 Ethernet (RJ45)
• BCM43143 WiFi on board
• Bluetooth Low Energy (BLE) on board
• Low-Level Peripherals:
  • 27 x GPIO
  • UART
  • I2C bus
  • SPI bus with two chip selects
  • +3.3V
  • +5V
  • Ground
• Power Requirements: 5V @ 2.4 A via microUSB power source
• Supports Raspbian, Windows 10 IoT Core, OpenELEC, OSMC, Pidora, Arch Linux, RISC OS and More!
• Dimensions: 85mm x 56mm x 17mm

Specification:

• Operating Voltage Range: DC4.5-20V
• Static Current: <60uA
• Output Level:
  • High = 3.3V 
  • Low = 0V
• Trigger: Repeatable Trigger (Default)
• Delay Time: Default 8 seconds +-30%
• PCB Dimensions: 10 x 23mm
• Induction Angle: <100 Degree Cone Angle
• Induction Distance: within 3 meters
• Working Temperature: -20 - +80 degrees
• Sensor Lens Diameter: 10mm
• Dimensions: 1.57 x 0.51 x 0.39" / 4 x 1.3 x 1cm (L x W x H)
• Color: White
• Weight: 5g
• Material: Aluminum Alloy & Plastic
• Base Type: E06

Specification

• Diameter: 1.75mm.
• Weight: 1kg.
• Print temperature: 195-230°C.
• Melt temperature: 190°C 2.16kg
• Print bed temperature: 0-60 ˚C

• Motor length: 32MM
• Motor diameter: 28MM
• Pump length: 36MM
• Total length: 69MM
• Pump diameter: 40MM*35MM

• Broadcom BCM2711, 64-bit ARM Cortex-A73 (ARMv8), Quad-core, 28nm Processor SoC running @ 1.5GHz c/w metal body for better heat dissipation.
• LPDDR4 4GB SDRAM
• 2 x USB 3.0 Port + 2 x USB 2.0 Port
• Expanded 40-pin GPIO Header
• 4-pole 3.5mm Connector
• 2 x Micro HDMI Port, support 4Kp60 video, Dual Display
• Raw LCD (DSI)
• CSI Port for Image / Camera input
• Storage: Micro SD Card
• True Gigabyte Ethernet Port up to 900Mbps or MORE !!!
• POE (Power-Over-Ethernet) support, requires seperate POE Hat
• 2.4GHz & 5GHz IEEE 802.11.b/g/n/ac Wireless LAN.
• Bluetooth 5.0 & BLE (Bluetooth Low Energy)
• Power Requirement: 5V 3A via USB Type C Cable
• Supports Raspbian (Check 3rd Party Operating System here.
• Dimension: 85mm x 56mm x17mm