RM7.20 - RM22.60
13.56MHz RFID/NFC Card Reader Module MFRC-522, RC522,PN532 kit
Price RM7.20 - RM22.60
Product SKU 40-Rfid/Nfc
Size (L x W x H) 6 cm x 4 cm x 1 cm
Reward Points 12
Points Needed 480
Availability 66
Type
Quantity
Description
Highlight
  • Operating Voltage: 3.3V ; Operating frequency : 13.56MHz
  • Maximum Current: 26mA ; No Load Current: 13mA ;
  • Power Down Current: 80uA;
  • Weight : 0.03kg
  • Supports I2C, UART and SPI protocol (max speed :10Mbits/s)
  • Maximum Reading distance : 0~60mm (mifare1 S50 Card)
  • Operating Temperature : -20 - 80C ; Relative Humidity : 5-95%;
  • Supports following card mifare1 S50、mifare1 S70、mifare UltraLight、mifare Pro、mifare Desfire

A highly integrated reader/writer IC for contactless communication at 13.56 MHz, which supports ISO/IEC 14443 A/MIFARE mode.The set including 1pcs Male 8 pin straight header, 1pcs Right Angle Male 8 pin header, 1pcs RFID mifare1 S50 Card, 1pcs RFID mifare1 S50 Tag.

SPECIFICATIONS

  • Operating Voltage: 3.3V ; Operating frequency : 13.56MHz
  • Maximum Current: 26mA ; No Load Current: 13mA ;
  • Power Down Current: 80uA; Dimension : 40mm*60mm
  • Supports I2C, UART and SPI protocol (max speed :10Mbits/s)
  • Maximum Reading distance : 0~60mm (mifare1 S50 Card)
  • Operating Temperature : -20 - 80C ; Relative Humidity : 5-95%;
  • Supports following card mifare1 S50、mifare1 S70、mifare UltraLight、mifare Pro、mifare Desfire

Application : low cost, suitable for equipment development, the development of advanced applications reader users, the need for RF card terminal design / production users. Pin Connection :http://rootger.blogspot.my/2014/07/rfid-rc522-pinout.html Arduino Example : http://playground.arduino.cc/Learning/MFRC522

 

PN532

  • 80C51 microcontroller core with 40kBROM and 1kBRAM
  • Highly integrated analog circuit, demodulation, and decoding response
  • Support NFC RFID reading and writing, P2P communication with peers
  • Easy to change between communications option
  • The output buffer driver is connected to the antenna through a minimum number of external passive devices
  • Integrated RF field detector
  • Integrated data pattern detector
  • Support ISO / IEC14443A / MIFARE®
  • Support ISO / IEC14443B only in reader mode
  • The typical working distance exceeds 50mm in the reader mode, the specific distance is determined by the antenna size, tuning, and power supply
  • Working distance up to 50mm in NFCIP-1 mode, depending on antenna size, tuning, and power supply
  • The typical working distance in card operation mode is about 100mm, the specific distance is determined by the antenna size, tuning, and external field strength
  • In the reader mode, support MifareClassic encryption which can support two higher data transmission rates of 212kbit / s and 424kbit / s
  • In FeliCa mode, support communication baud rate of 106kbit / s, 212kbit / s and 424kbit / s
  • Integrated NFCIP-1 RF interface, transmission rate up to 424kbit / s
  • Support host interface:
    • SPI interface
    • I2C interface
    • Serial UART
  • Flexible interrupt mode
  • Low power consumption mode-hardware power-down mode-software power-down mode
  • When the device is in power-down mode, it can automatically wake up through the I2C, HSU, and SPI interfaces
  • Programmable timer
  • Quartz crystal oscillator
  • 2.7V ~ 5.5V power supply
Reviews (0)
view all
back
0
0 reviews
What's in the box

1 x 13.56MHz RFID Card Reader Module MFRC-522

1 x 13.56MHz NFC Card Reader Module PN532